Mr. Gasket 5834 Stock Ultra-Seal Intake Manifold Gasket Set

Mr. Gasket 5834 Stock Ultra-Seal Intake Manifold Gasket Set Review

Mr. Gasket 5834 Stock Ultra-Seal Intake Manifold Gasket Set Feature

• Port dimensions measure 2.11" high by 1.25" wide
• Cellulose and nitrile provide sealing and durability
• Silicone beading applied around each port creates a tight-leak proof seal
• Resists wicking and can withstand 600-degree heat
• Designed for stock ports

This stock ultra-seal intake manifold gasket set is made of a cellulose and nitrile material that is less compressible with a 2.11" port height and 1.25" port width with a thickness of 1/16". This material has an anti-stick coating, plus a silicone bead around each intake port except where noted for a tight, leak-proof seal. These gaskets are a great solution for intake-sealing problems associated with the small sealing areas between ports. This set comes complete with all necessary seals, can be trimmed to fit modified ports, fits aluminum heads and manifolds, and has an open type of water crossover style.

Hondata Intake Manifold Gasket - K20A

Hondata Intake Manifold Gasket - K20A Review

Hondata Intake Manifold Gasket - K20A Feature

• Gasket is designed to fit all 94-01 Acura Integra GS-R B18C1 & JDM B18C SiR engines.

The Heatshield is a replacement intake manifold gasket made from special high temperature plastic, designed to insulate the intake manifold from the cylinder head. Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power. Around town, testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30° C drop has been measured.

Dorman 615-181 Intake Manifold

Dorman 615-181 Intake Manifold Review

Dorman 615-181 Intake Manifold Feature

• Re-engineered by Dorman with heat-resistant molding to reduce both warping and coolant leaks (where applicable)
• Some manifolds feature a reinforced aluminum coolant crossover to eliminate corrosion and vibration (where applicable)
• Reinforced EGR and coolant passage walls increased manifold durability (where applicable)
• Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake Manifold Review

Edelbrock 2701 Performer Intake Manifold Feature

• Made of aluminum with a natural finish
• Dual plane intake style
• RPM range is idle to 5,500 RPM
• Single carburetor without EGR
• Use on stock or original equipment standard deck

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5,500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

Dorman 615-180 Intake Manifold

Dorman 615-180 Intake Manifold Review

Dorman 615-180 Intake Manifold Feature

• Re-engineered by Dorman with heat-resistant molding to reduce both warping and coolant leaks (where applicable)
• Some manifolds feature a reinforced aluminum coolant crossover to eliminate corrosion and vibration (where applicable)
• Reinforced EGR and coolant passage walls increased manifold durability (where applicable)
• Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

Fel-Pro Ms 93313-1 Intake Manifold Gasket Set

Fel-Pro Ms 93313-1 Intake Manifold Gasket Set Review

Fel-Pro Ms 93313-1 Intake Manifold Gasket Set Feature

• Per Car Qty:1

Fel-Pro Gaskets Ms93313-1 Int Manifold Set

Kastar Hand Tools (KAS5530) Intake Manifold Wrench

Kastar Hand Tools (KAS5530) Intake Manifold Wrench Review

Kastar Hand Tools (KAS5530) Intake Manifold Wrench Feature

• Reversible ratcheting box wrench is used on Big Twin engines to install and remove intake manifold socket head cap screws
• Wrench consists of a vinyl grip and a 1/4 ball-end allen bit

• Has a 1/4" ball-end Allen bit
• The wrench consists of a vinyl grip
• Reversible ratcheting box wrench

This reversible ratcheting box wrench is used on Big Twin engines to install and remove intake manifold socket head cap screws.

Godspeed B-series Civic Integra B18 Gsr Dohc High Flow Intake Manifold Gsr- Model Only

Godspeed B-series Civic Integra B18 Gsr Dohc High Flow Intake Manifold Gsr- Model Only Review

Godspeed B-series Civic Integra B18 Gsr Dohc High Flow Intake Manifold Gsr- Model Only Feature

• DESCRIPTION : 1994-2001 INTEGRA HIGH FLOW CAST INTAKE MANIFOLD
• will fit the following vehicle: -94-01 integra b18c1 gsr motor only -civic with gsr b18c1 swap also
• -Completely bolt on -30% more flow then stock intake manifold -good for all motor application , perfect for turbo charged motor
• -Improve air flow -high quality CNC machined -Improve howerpower by as much as 8 %. -utilizes all stock sensors and auxiliaries
• 3 YEAR WARRANTY IF INSTALLED BY PROFESSIONAL MECHANIC ( ASE CERTIFIED)

DESCRIPTION : 94-01 INTEGRA HIGH FLOW CAST INTAKE MANIFOLD will fit the following vehicle: -94-01 integra b18c1 gsr motor only -civic with gsr b18c1 swap also -Completely bolt on -30% more flow then stock intake manifold -good for all motor application , perfect for turbo charged motor -Improve air flow -high quality CNC machined -Improve howerpower by as much as 8 %. -utilizes all stock sensors and auxiliaries 3 YEARS WARRANTY

Fel-Pro MS96454 Intake Manifold Gasket Se

Fel-Pro MS96454 Intake Manifold Gasket Se Review

Fel-Pro MS96454 Intake Manifold Gasket Se Feature

• Per Car Qty:1
• Upper set incl

Fel-Pro Gaskets Ms96454 Intake Manifold Set