Edelbrock 2111 Performer Intake Manifold

Edelbrock 2111 Performer Intake Manifold Review

Edelbrock 2111 Performer Intake Manifold Feature

• Basic operating RPM is from idle to 5,500 RPM
• Intake is made of aluminum material with a natural finish
• Intake style is dual plane and carburetor quantity is single
• Performer is a 90 degree V6 and non-EGR (Electronic Gas Recirculation)
• Intake is 50-state street legal, when used with the correct carburetor and in the correct application

The Edelbrock Performer Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. The Performers are ideal for passenger cars, trucks and RVs. This dual bolt pattern waterneck fits both automotive and marine applications.

ARP 1342001 Black Oxide 12-Point Intake Manifold Bolt

ARP 1342001 Black Oxide 12-Point Intake Manifold Bolt Review

Chevrolet 265-400 cid engines, factory original equipment manufacturer. black oxide chrome moly with a Hex Head. 3/8" x 16 thread Prevent intake manifold leaks and are rated at 170,000 psi and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. ARP Intake Manifold Bolt part number 134-2001

Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces Washers are included.

Dorman OE Solutions 615-178 Intake Manifold

Dorman OE Solutions 615-178 Intake Manifold Review

Dorman OE Solutions 615-178 Intake Manifold Feature

• Re-engineered by Dorman with heat-resistant molding to reduce both warping and coolant leaks
• Features a reinforced aluminum coolant crossover to eliminate corrosion and vibration
• Includes integrated gasket design
• Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)

More like a complete service kit than a single part. Dorman’s Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Edelbrock 5486 Performer Intake Manifold

Edelbrock 5486 Performer Intake Manifold Review

Edelbrock 5486 Performer Intake Manifold Feature

• Dual-plane, low-rise intake manifolds with a 180 degree firing order
• Boosts torque from off-idle to 5,500 RPM
• Available with non-EGR style
• Not compatible with C-3 and C-4 electronic fuel management systems
• Comes with a natural finish

The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5,500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available only with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

Weiand 7136Win 6-71/8-71Sbc Supercharger Intake Manifold Satin

Weiand 7136Win 6-71/8-71Sbc Supercharger Intake Manifold Satin Review

Weiand 7136Win 6-71/8-71Sbc Supercharger Intake Manifold Satin Feature

• More Streetable
• Easier Installation

671 - 871 Supercharger Intake Manifold 55-86 Chevy Small Block Engines Street/Strip Use Only Satin Finish

Fel-Pro MS95977-1 Manifold Gasket Set

Fel-Pro MS95977-1 Manifold Gasket Set Review

Fel-Pro MS95977-1 Manifold Gasket Set Feature

• Per Car Qty:1
• 2nd Design, w/Rubber-plastic end seals w/Locating pins
• Lower set

Fel-Pro Gaskets Ms95977-1 Manfld Set

Edelbrock 7116 Performer RPM Vortec Intake Manifold

Edelbrock 7116 Performer RPM Vortec Intake Manifold Review

Edelbrock 7116 Performer RPM Vortec Intake Manifold Feature

• Single four-barrel for the street rod, marine and engine swap market engines
• Broad power band makes Performer RPM ideal for street or strip
• Manifold accepts square-bore carburetor only
• Intended for high-performance street or marine engines operating from idle to 5,500 RPM
• Not for emissions-equipped engines and has no provision for exhaust-heated chokes

The Edelbrock Performer RPM Vortec Intake Manifold is a single four-barrel intake which is designed for the street rod, marine and engine swap market engines and later Vortec cast iron or the Edelbrock E-Tec aluminum heads. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. This broad power band makes Performer RPM ideal for street or strip. The manifold accepts square-bore carburetor only. They are intended for high-performance street and marine engines operating from idle-5,500 RPM. The Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.

Holley 300-117 EFI Hi-Ram Intake Manifold with 1 x 102 mm GM LS Throttle Body

Holley 300-117 EFI Hi-Ram Intake Manifold with 1 x 102 mm GM LS Throttle Body Review

Holley 300-117 EFI Hi-Ram Intake Manifold with 1 x 102 mm GM LS Throttle Body Feature

• Base Plenum Top Mounting Flange Height - 8.42" to the lifter valley cover flange on engine block.
• Total Height with 92/102mm EFI Plenum Top - 12.32" to the lifter valley cover flange on engine block.
• Port Size - 2.49" Height x 1.21" Wide. Mounting Flange Gasket Type - Standard LS3 Molded O-Ring
• Plenum Top Gasket Type - 3/32" Round O-ring Cord. Runner Length - 6.50", As-Cast Runner Cross-Sectional Area - Tapered 4.25" to 2.77 in (square)
• Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height - 8.42" (from engine block lifter valley cover flange), Longitudinal Location - 3.84" (forward from engine block front flange), Angle - 25 deg. (down from vertical)

HOLLEY 300-117 GM LS Hi-Ram Intake Sys. - 102mm EFI Throttle Bdy

Edelbrock 71187 Intake Manifold

Edelbrock 71187 Intake Manifold Review

Edelbrock 71187 Intake Manifold Feature

• Designed to increase horsepower and torque
• Feature a single plane intake style
• Delivers good throttle response
• Provides maximum power at high RPM range
• Increases durability and reliability

Edelbrock Intake Manifolds are designed to increase horsepower and torque. They are made of aluminum material with a natural finish. These single plane intake manifolds deliver good throttle response and provides maximum power at high RPM range.

ACDelco 89017816 Intake Manifold Gasket Kit

ACDelco 89017816 Intake Manifold Gasket Kit Review

ACDelco 89017816 Intake Manifold Gasket Kit Feature

• Original Eqiupment Supplier validated by GM Engineering, which assures proper form, fit and function
• Designs are enhanced to incorporate Original Equipment updates, upgrades, and Technical Service Bulletins
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

Features and Benefits
ACDelco OES Engine Components offer installer friendly product categories such as intake manifolds, intake manifold gaskets, engine oil cooler lines, tensioners, balancers and pulleys; for most GM cars, light-duty trucks and SUVs on the road today. All are OES validated by GM Engineering, which assures proper form, fit and function. This is important on these high labor hour heavy repairs. The part designs are enhanced to incorporate OE updates, upgrades and Technical Service Bulletins (TSBs). Only ACDelco can offer complete late-model coverage. All ACDelco engine component include a 12 month 12,000 mile limited warranty*

* Whichever comes first. To the original retail purchaser. Parts only; installation not included. See your local retailer or independent service center that offers ACDelco Parts for details.

Did You Know?
Your vehicle's differential is a kind of unsung hero within the powertrain system. The differential has two primary responsibilities: directing engine power to the drive wheels and allowing the wheels to rotate at different speeds when cornering. If the wheels couldn't rotate at different speeds, your vehicle's tires would display a wheel hop effect, thereby making cornering a rough experience for both you and your tires.So, don't be indifferent toward your differential. It plays a vital role in moving your vehicle and ensuring a smooth ride.

Radiator Contamination:
When an engine or transmission fails and needs to be replaced, often, the vehicle's radiator must be replaced as well. This is due to the engine or transmission contaminating the radiator with excessive gear shavings or other foreign objects at failure.

What It Does?
The powertrain includes the engine, transmission (transaxle on front-wheel-drive vehicles) and drive axles that work in tandem to move the vehicle.

Service & Maintenance
While many of your vehicle's powertrain components such as the driveshaft and axle shafts don't require much routine maintenance, there are a few parts that need periodic attention.

• Check the engine oil level at every fuel fill and add oil if necessary
• About once a month, make sure all tires are inflated properly and check for any unusual wear or damage
• Have an underbody flushing performed approximately once a year
• The engine's exterior should be cleaned periodically. Buildups of oil and dirt can cause the engine to run hot or hide leaks
• Have your vehicle inspected if the Service Engine Soon light illuminates

For most GM cars, light-duty trucks and SUVs on the road today.

Edelbrock 2161 Performer Intake Manifold

Edelbrock 2161 Performer Intake Manifold Review

Edelbrock 2161 Performer Intake Manifold Feature

• Dual-plane, low-rise intake manifolds with a 180 degree firing order
• Boosts torque from off-idle to 5,500 RPM
• Available with non-EGR style
• Will not fit under stock hood of Corvette
• Comes with a natural finish

The Edelbrock Performer Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide RPM range, from off-idle all the way up to 5,500 RPM. The Performers are ideal for passenger cars, boats, tow vehicles and RV's. These manifolds also deliver improved throttle response over stock intakes and are available with non-EGR styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube.

Edelbrock 7577 Performer RPM Air-Gap Intake Manifold

Edelbrock 7577 Performer RPM Air-Gap Intake Manifold Review

Edelbrock 7577 Performer RPM Air-Gap Intake Manifold Feature

• Constructed from aluminum with a polished finish
• Basic operating RPM ranges from 1,500 - 6,500
• Dual plane intake style
• Includes nitrous bosses

The Edelbrock Performer RPM Air-Gap Intake Manifold's exclusive design separates the runners from the heat of the lifter-valley cover resulting in a cooler, denser charge and more power. Constructed from aluminum with a polished finish, these manifold's basic operation ranges between 1,500-6,500 rpm.