Victor Reinz Intake Manifold Gasket

Victor Reinz Intake Manifold Gasket Review

Victor Reinz Intake Manifold Gasket - To cylinder head. (1 Req); 1987 Audi Coupe; 1989-1991 Audi 100 Quattro, L5 2.3L; 1989-1991 Audi 100, L5 2.3L; 1988-1992 Audi 80 Quattro; 1991-1992 Audi 80, L5 2.3L; 1988-1989 Audi 90 Quattro; 1988-1991 Audi 90, L5 2.3

Fel-Pro MS 97044 Intake Manifold Gasket

Fel-Pro MS 97044 Intake Manifold Gasket Review

Fel-Pro Gaskets MS97044 INTAKE MANIFOLD

Edelbrock 7276

Edelbrock 7276 Review

Edelbrock 7276 Feature

• Embossed Silicone Bead Surrounding The PortClean Positive SealMatched To Manifolds And Cylinder Heads
• Installation Method - Replacement

GASKET SET; INT

INTAKE MANIFOLD VE383

INTAKE MANIFOLD VE383 Review

INTAKE MANIFOLD VE383

Victor Gaskets Intake Manifold Set MS16319 New

Victor Gaskets Intake Manifold Set MS16319 New Review

Victor MS16319 Intake Manifold Set

Fel-Pro MS8931SH1 Manifold Set

Fel-Pro MS8931SH1 Manifold Set Review

49-67 CAD 331,365,390,429

Felpro MS 96815 Intake Manifold Gasket Set

Felpro MS 96815 Intake Manifold Gasket Set Review

Fel-Pro MS96815

Hondata Heatshield Gasket for Honda S2000

Hondata Heatshield Gasket for Honda S2000 Review

Hondata Heatshield Gasket for Honda S2000 Feature

• Gasket designed to fit all 00-05 Honda S2000 F20C Engine

The Heatshield is a replacement intake manifold gasket made from special high temperature plastic, designed to insulate the intake manifold from the cylinder head. Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power. Around town, testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30° C drop has been measured.

Holley 17-70 Intake Manifold Spacer

Holley 17-70 Intake Manifold Spacer Review

Holley 17-70 Intake Manifold Spacer Feature

• Open 1" tall phenolic spacer for top performance
• Open phenolic spacer with thickness of 1"

The Holley intake manifold spacer is designed for Dominator flange.

Fel-Pro MS90049 Manifold Gasket Set

Fel-Pro MS90049 Manifold Gasket Set Review

Fel-Pro MS90049 Manifold Gasket Set

Intake Manifold

Intake Manifold Review

2003-2007 Ford Powerstroke 6.0L Intake Manifold SmallMouth Model 20-003-101This model comes with a 3 opening that will install using your current stock hose/pipe. It also has a single port that is pre-drilled, tapped and installed plug. Also comes with installation manual and all required harware for mounting.

Edelbrock 7104 Performer Intake Manifold

Edelbrock 7104 Performer Intake Manifold Review

Edelbrock 7104 Performer Intake Manifold Feature

• Produces incredible top-end horsepower
• Fits cast iron bowtie heads
• Retains good throttle response
• Intended for high-performance street or competition engines that run from 1,500 to 6,500 RPM
• Larger plenums and runners to match the free-flowing exhaust

The Edelbrock Performer RPM Intake Manifolds have a high-rise, dual-plane layout, with patented runner tuning and a 180 degree firing order. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They do not compress well when used with an aluminum intake manifold. The factory composition-type embossed gasket also works satisfactorily. It is intended for high-performance street or competition engines that run from 1,500 to 6,500 RPM. It delivers maximum power with a broad torque curve for high-performance street applications. This manifold has provisions to add oil fill tube but no provisions for exhaust heated or stock-style choke.